PDA

View Full Version : What are these and what do they do?



Daz.
07-05-2008, 21:12
sorry Richy for setaling your pic and modding it :D

http://i2.photobucket.com/albums/y29/Daz0rz/trackcar009.jpg

The circled items - what do they secure those brackets? can they be removed?

And I'm nearly ready for spraying the boot floor back up but as I was cleaning and prepping I removed all the sealant that goes all the way round the boot (see sillycunt/silicone :lol: )

Now I'm not sure if I should reseal it around again or leave it as is - any thoughts? I know all the stuff I removed was just the excess squeezed out when bonding the panels but would you silicone it back up for good measure?

Thanks chaps

samboRT
07-05-2008, 21:22
Hangers for the petrol tank?

:?:

CRLParis
07-05-2008, 21:31
those are the bolt heads that hold the rear beam to the shell of the car :wink:

MatBrown
07-05-2008, 23:07
those are the bolt heads that hold the rear beam to the shell of the car :wink:

Indeed, pretty essential!


Mat.

richy
07-05-2008, 23:17
lol cheeky mofo! :lol:

MAXIBOY
07-05-2008, 23:32
even better when welded in to the cage mounts....

Daz.
08-05-2008, 06:32
those are the bolt heads that hold the rear beam to the shell of the car :wink:

Indeed, pretty essential!


Mat.

:lol:

So not the best to loosen them off then when working - will have to work round that issue then!


Anyone any thoughts on the sealant?

MAXIBOY
08-05-2008, 08:03
yeah replace with brushable seam sealer....don't use silicone as you can't paint over it well...

can get it from most motor factors..