ARB Bushes

[MattyH16valver]

Hi, does anyone know where I can get some of these from for fairly cheap? Are they real bastards to fit?
Cheers
Matt

[talkingfish]

I'm looking at getting mine done - they are only about £6 + VAT from Renault - but they are a shit to fit apparantly....

[Lunner]

Easy enough to fit, just need a G clamp or two

[MattyH16valver]

I'm looking at getting mine done - they are only about £6 + VAT from Renault - but they are a s**t to fit apparantly....

Yeah....not too bad price then! 8)

[MattyH16valver]

Easy enough to fit, just need a G clamp or two

I remember seeing ur post when i did a serch mate. So is there and Inner and Outer Bush Bush for each side that you need to get?
Cheers. Matt

[Coops]

yeah inner and outer, outers are easy enough, inners can be fiddly as tight fit and not much space under there to get clamps etc in

[Wobba]

Hi, does anyone know where I can get some of these from for fairly cheap? Are they real bastards to fit?
Cheers
Matt
Try here:

http://www.powerflex.co.uk/select_products.asp

I got mine from Rally Design but they are not for Williams :( They do R5 GTT though which may fit...

[Lunner]

The williams is different to my thread i posted up, they are the 16v ones, i can confirm R5 GTT ones fit, thats what i'm running on mine, poly race ones from Rally Design.

As above outers are easy enough think i used a G clamp to compress the clamp up and got the bolt in.

Inners are a bit more tricky but use a g clamp to compress them and a small spanner to hold the bits together to get the bolt in, as there isn't enough room to get a g clamp on the bit that the bolts go through

[MattyH16valver]

Well i'm bying new wishbones from buypartsby.co.uk as there cheap as chips and want to keep the car stardard really so I don't think that ill be going for polly bushes! Looks like I need a G Clamp too then...