PDA

View Full Version : loom missing a couple of plugs



teabag
29-04-2008, 20:20
right, been wiring up my valver rt todayand came across a few wires without plugs on...im 90% sure what there for and have spare plugs to attach but id like some confermation

soooo here goes.

1. three wires coming out of the loom at the back of the block near the starter motor, im sure these are for the lambda sensor, theres a white one, a black one and a yellow one

http://i171.photobucket.com/albums/u312/teabagRT/29-04-08_1704.jpg

2. two wires coming out of the loom near the top engine mount, theres a cream coloured one and a white one, i think these plug into the radiator but they have been cut back short.

http://i171.photobucket.com/albums/u312/teabagRT/29-04-08_1702.jpg

and where i think they go...
http://i171.photobucket.com/albums/u312/teabagRT/29-04-08_1703.jpg

and finally

3. a red and a black wire coming out of the loom at the front of the engine (underneath the inlet mani not above it) i have no idea what these are for.

http://i171.photobucket.com/albums/u312/teabagRT/29-04-08_1705.jpg

there you go. what you think???

teabag
29-04-2008, 20:23
also any idea what this is for and do i still need it as there isnt a plug/wires for it in the valver loom

http://i171.photobucket.com/albums/u312/teabagRT/29-04-08_1707.jpg

(sorry about pic size/quality)

MAXIBOY
29-04-2008, 21:57
1 i agree lambda sensor.
2 wires for the switch which runs the fan for cooling. connect together fan should run.
3. not sure. under the manifold theres a knock sensor and a cold start injector. check these.

think the final one is to do with the recirculation system. mines mounted in a different place though...

teabag
30-04-2008, 14:19
right, thats confermed 1. and 2. for me (aswell as looking at the wiring diagrams in haynes)

ill have a poke around to see if theres anywhere for 3. to go

any more ideas about the other pic??

cheers maxi

MAXIBOY
30-04-2008, 18:24
i,m sure its some sort of air inlet valve in the cannister system that runs from the rocker cover.