Is this a standard fuel pressure regulator?

[Laine_16v]

The FPR's i have seen have a small tube sticking out the end, mine pops out the side, is this a standard williams regulator??

http://i133.photobucket.com/albums/q51/laine_16v/FPRLarge.jpg

[105epwr]

i cant quite see but does it have "3bar" stamped on it like they normally do?

[105epwr]

Hi-anyone no or have the wiring diagram for the std ign coil?ive got a omex rev limiter which req the wires to go across the coil ie +and- but im havin probs with it not working as the clio int like your average std ign coil.cheers

[105epwr]

Hi-anyone no or have the wiring diagram for the std ign coil?ive got a omex rev limiter which req the wires to go across the coil ie +and- but im havin probs with it not working as the clio int like your average std ign coil.cheers
shit wrong bit :oops:

[Laine_16v]

It sais "Made in germany" on it i think, its too dark to check now though. Ill check tommorow.

[lewis_willy2]

its looks a standard 1, however mine had the vacuum coming straight off the end but is from a williams 2

[stan]

its std, some come out the side, aome out the end