PDA

View Full Version : 300mm 2pc Disc + Wilwoods Superlites


tony16v
21-04-2008, 12:32
See original thread here....

http://www.williamsclio.co.uk/forum/viewtopic.php?t=25287&highlight=brakes

I've had them sat in my garage for 6months... I've not used them and never got round to fitting them on the turbo....

I think these kits were originally from Rallydesign but they dont sell the kits anymore, so if your after a good set of brakes....

as cash is abit tight I'm going to sell them on...

I paid 300 for them and thats what I'm looking for...

can arrange postage, but they weight a ton so will probably cost 20quid...

or can be picked up frm Brackley...

cheers

Tony.
evouk
21-04-2008, 17:11
hi mate

have you any spare pads?
speed
21-04-2008, 17:16
they come with brackets lines etc? get some pics up :D
alex_e3
21-04-2008, 17:24
Hi mate,

I know you bought them 2nd hand, but do you know how many miles the brakes have done please? If you don't, what sort of lip is there on the discs? Are all the bleed nipples ok and without rust?

Also, are braided hoses, pads, and brackets for the hub included in the sale? Will the calipers clean up ok or will they need recoating?

Very very interested.

Cheers,

Al
tony16v
21-04-2008, 20:23
evo, no spares at the mo... couldn't get enough interest in another group buy...

speed, all parts included, lines, brakets, bolts etc...

alex, Theres no lip on the discs, and the pads look new... I would say very little mileage... All parts included, hoses, bolts, brackets...

Overall for condition I would say all they need is a good clean up....

anything just ask...

cheers Tony.
Oszy
22-04-2008, 05:43
this can be used by standard 15" wheels?
Northerner
22-04-2008, 07:53
YHPM :D
tony16v
22-04-2008, 08:54
they will fit behind williams wheels, theres a pic in the original thread of them fitted with williams wheels, but it is very tight.... I'm not sure about other 15" wheels...

I've had loads of PMs so I'm just working through them now...

cheers

Tony.
tony16v
22-04-2008, 19:02
These are now SOLD... thanks to everyone for there interest....
evouk
22-04-2008, 19:18
tony please remind me of the part numebrs for pads to match my set up.

I WILL WRITE it down this time...............