engine mount replacement(williams)

[busterhymes]

got about 10mm of movement on gear lever when i accelerate then lift off is this acceptable, new dogbone fitted cos other knackered. so am wondering is movement ok or do i need to change other two mounts and considering the fitting of 4th mount so anybody have any advice and help with installation instructions read guide on here for 4th mount but no pics so thats me fooked :D :D :D

[wavy]

i wouldnt worry at 10mm
its made 2 move some imo

[MAXIBOY]

http://i36.photobucket.com/albums/e15/123maxiboy/Picture114.jpg

4th mount bolts on the gearbox end. all holes bolts are there easy 30 min job...

[cliolord]

2 other options from maxiboy.....Go to a local garage and ask them to press your current dog bone/gearbox stabiliser (at back of gearbox) out and turn the large void bush 90* and press it back in....

other option and better option is to buy a new dog bone from Renault for around 30quid (as the pattern dog bones suck!) and do the above :lol: will work a treat!

[busterhymes]

ta for advice on movement anyone got part numbers for bits i need for 4th engine mount???? :) :) :) :)

[bradharding]

Tigerseal ftw mate. PM me if you want to know more.