PDA

View Full Version : Oil Cooler



seanofnp
23-03-2008, 17:52
When i did my engine swap i ran into a snag and had to take off the standard F7R oil cooler. Say i want to put an aftermarket mocal kit on, do i need to find the original oil cooler setup first or do i just by the kit and it fits elsewhere?

richy
23-03-2008, 19:01
you will need to remove the oil filer to put the sandwhich plate on then fit filter ointro that, then just route piping to the cooler

Coops
24-03-2008, 01:28
as richy says mate, just buy a mocal, will fit straight to your block. the mocal kit feed oil directly into a front mount rad to cool it, standard one is simply a shitty heat exchanger fed with coolant hoses, rubbish :wink:

Lunner
24-03-2008, 13:27
You will need a threaded adaptor off a renault with just a normal oil filter, i managed to find one at the scrappies that was hand tight that i robbed

AndyFielder
24-03-2008, 14:31
my oil coolers will fit onto the block, or onto the standard cooler, send me a PM if interested, got 4 left.