View Full Version : Oil Cooler
seanofnp
23-03-2008, 17:52
When i did my engine swap i ran into a snag and had to take off the standard F7R oil cooler. Say i want to put an aftermarket mocal kit on, do i need to find the original oil cooler setup first or do i just by the kit and it fits elsewhere?
you will need to remove the oil filer to put the sandwhich plate on then fit filter ointro that, then just route piping to the cooler
as richy says mate, just buy a mocal, will fit straight to your block. the mocal kit feed oil directly into a front mount rad to cool it, standard one is simply a shitty heat exchanger fed with coolant hoses, rubbish :wink:
You will need a threaded adaptor off a renault with just a normal oil filter, i managed to find one at the scrappies that was hand tight that i robbed
AndyFielder
24-03-2008, 14:31
my oil coolers will fit onto the block, or onto the standard cooler, send me a PM if interested, got 4 left.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.