Ticking over problem

[LEEDASH]

1st off hello all,ive got a little problem.When on starting up the ol' valver itr seems to idle around '10' and sputter and jump a bit ? any ideas had service done by a local garage all parts were correct because i supplied them.

[16V-AL]

Have the exact same prob with my 92 valver and its doin my head in. car starts fine runs well for approx 1 minute then goes lumpy and cuts out. yours the same?

[white16valver]

iscv?

[LEEDASH]

yeah sort of but with out the cut out,just lumpy,whats a iscv ?

[white16valver]

Idle Speed Control Valve - do a search for it as there's been a pic posted recently :)

I think you need to remove it and clean it with Carb Cleaner to help the idle.

I might do mine at some point, it's a bit lumpy sometimes lol

[16V-AL]

yeah m8 prob just your iscv. think mine is ignition coil because i've pretty much eliminated everything else by replacing it. "THE EXPENSIVE WAY!!"

[cliolord]

Doesn't sound like ICV to me, it seems to be operating if its idleing for a minute or so from cold and then stalls...If it stalls then the ICV is moving and allowing a change in metered air to enter the inlet. Maybe coolant temp sensor is abit bummed but let us know if cleaning the ICV sorts this out. good luck