View Full Version : 16v Williams wishbones
KingStromba
14-06-2005, 11:01
Do the 16v and Williams share the same wishbones?
If so what is it that makes the Williams track wider? Would any given point on a 16v wishbone be the same distance from the same point on the opposite wishbone in both a 16v and a Williams?
Would be a bit illogical to stamp "CLW1" on the wishbone, if it is also for the 16V. But then again, logic on a french car is a bit of an oxymoron.
http://img.photobucket.com/albums/v327/Tywee/clw1.jpg
no the 16v'er wishbones are differant mate.
You need williams ones.
Do the 16v and Williams share the same wishbones?
If so what is it that makes the Williams track wider? Would any given point on a 16v wishbone be the same distance from the same point on the opposite wishbone in both a 16v and a Williams?
Like northy says, wishbones are wider for the williams/R19 16V...
Im just using 19 wishbones instead of valver ones just for fun :P
Wider lol :wink:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.