PDA

View Full Version : 16v/Williams full stainless system


GT-Facer
06-03-2008, 15:50
I have a full stainless exhaust system for 16v or Williams for sale.
Unsure of brand as it came with the car when i bought it. Center box is straight through so it is quite loud.

http://i37.photobucket.com/albums/e51/benfacer/DSCF5409.jpg


Good condition.

£80 delivered
drsmith1979
07-03-2008, 03:16
looks very similar to a mongoose
GT-Facer
07-03-2008, 10:47
I thought it was a mongoose from the sound. Was bought from halfords by the previous owner of the car and the recept just says performance exhaust.
bass_direct
07-03-2008, 20:42
that backbox is a magnex, i'm 95% sure
bass_direct
07-03-2008, 20:42
and that middle section looks like a mongoose..
Laine_16v
07-03-2008, 20:51
I agree with bass, the backbox is magnex for sure.

The mid section looks very similar to my mongoose mid section too.

But mongoose pipework is bigger than all the other systems, so those two items wouldnt bolt up....
drsmith1979
07-03-2008, 21:01
i was under the impression that magnex back boxes have small metal 'slants' welded from the back box to either side of the exit pipe to make it almost look like a triangle, this doesnt have them hence why i think its a mongoose box... make sense? lol
drsmith1979
07-03-2008, 21:03
see what i mean on this threads pics of a magnex box:

http://www.williamsclio.co.uk/forum/viewtopic.php?t=29130
Laine_16v
07-03-2008, 21:55
Mongoose backboxes are cylindrical, i should know i have one :P

Thats not a mongoose backbox.
cliokiz
08-03-2008, 00:34
Neither the back box or centre section look anything like my mongoose system i have in the garage.
bass_direct
08-03-2008, 00:36
both look identical to my old systems, backbox is defo magnex, middle section is mongoose..
bass_direct
08-03-2008, 00:37
Neither the back box or centre section look anything like my mongoose system i have in the garage.


look harder :P
GT-Facer
08-03-2008, 13:53
This is why i didn't put a make in the advert as I am not sure!! lol
Was deffo bought as a whole system from Halfords as I have the recept from the previous owner.
The number on the back box is very similar to the number on the magnex back box I have for sale, and the Magnex I have fitted to my car, but I thought it wasn't a Magnex due to there being no metal slats (as drsmith1979 put).

It does give good power top end of the rev range on my hybrid (more than my magnex, but with a little less low down torque), and is pritty lound when coupled to a de-cat.
GT-Facer
11-03-2008, 18:14
BUMP

Offers anyone? Might even give it a clean :wink: