Head skimmed etc, but I found this... [Archive]

Wobba

28-02-2008, 20:34

http://i174.photobucket.com/albums/w102/barneywobba/DSC00329.jpg

Is that bad?

Wobba

28-02-2008, 20:35

I am missing a bit off the end of one...cant find it in the head at all.

white16valver

28-02-2008, 20:47

eek :shock:

Wobba

28-02-2008, 20:55

I think they ripped one off as they took them out for the skim...not sure what to do :(

drsmith1979

28-02-2008, 21:09

as per my previous post, either get a set from a scrapper and refurb them with new seals etc.. or see if you can buy a set of matched injectors that have already been cleaned and refurbed, someone did it on here and knows all about it, think it was cliorod but not sure....

Wobba

28-02-2008, 21:13

as per my previous post, either get a set from a scrapper and refurb them with new seals etc.. or see if you can buy a set of matched injectors that have already been cleaned and refurbed, someone did it on here and knows all about it, think it was cliorod but not sure....

You have to get them in sets? My pockets are not very deep right now after shelling out tons for headwork :(

Justin..

28-02-2008, 21:24

mate, i could help here, ill sell you my old valver ones for 15 quid. if interested im applyinand posting my licence form tomoro and should have it back in a 10 days hopefully. then im mobile :D

Wobba

28-02-2008, 21:29

Hehe, thanks Jus.

Mr Brown has a spare injector, and I need a sensor off him too! I'd like to really get stuck into the rebuild this and next weekend, and maybe have it finished (engine wise) by then.

Where do you have to go to get your licence? Lyndhurst? Or is that just where they take the licence away lol?

Justin..

28-02-2008, 21:30

nah i dont have to go anywhere mate, i just gotta sed the D1 form off to DVLA