View Full Version : Front Bumper on Pins
AndyFielder
06-02-2008, 16:37
Anyone done this?
Anything i should look out for, planning on doing it on the track car.
Andy
MatBrown
06-02-2008, 19:40
Summeh's cup car has a pinned front bumper.
Mat.
http://photos-b.ak.facebook.com/photos-ak-sf2p/v160/132/4/805790695/n805790695_1766049_3231.jpg
Looks like a good job ~ If anyone has details on what is required I too would be interested :wink: :wink: Looks like a very good "mod" for the Rally car. :roll:
AndyFielder
07-02-2008, 10:34
i want to use aerocatch's unsure if they will fit ok.
It's very easy, you just need to drill 4 holes in the metal bumper bar underneath, two either side, and two on the front either side. Bolt your pins in, slot the bumper and jobs a gooden.
It makes working on the front of the car a lot easier, bumper comes off within a few seconds.
Would have thought a rally car would already have this rod? :wink: Do the back bumper as well while your at it :lol:
stevie_b
07-02-2008, 15:50
you just need to drill 4 holes in the metal bumper bar underneath, two either side, and two on the front either side.
Are you using six pins to hold the bumper on?
It's very easy, you just need to drill 4 holes in the metal bumper bar underneath, two either side, and two on the front either side. Bolt your pins in, slot the bumper and jobs a gooden.
It makes working on the front of the car a lot easier, bumper comes off within a few seconds.
Would have thought a rally car would already have this rod? :wink: Do the back bumper as well while your at it :lol:
stevie_b
07-02-2008, 21:08
Yes, sorry I missed the bit about the front ones being done two on either side as well. 8 pins sounds like overkill to me though. Think I'll go with Lunner's method as it looks like you can get away with just 4.
Yes, sorry I missed the bit about the front ones being done two on either side as well. 8 pins sounds like overkill to me though. Think I'll go with Lunner's method as it looks like you can get away with just 4.
Oh well excuse me! That should have clearly been a hyphen and not a comma. Next time, I just won't bother :wink:
Yes, sorry I missed the bit about the front ones being done two on either side as well. 8 pins sounds like overkill to me though. Think I'll go with Lunner's method as it looks like you can get away with just 4.
I'm using 2 pins, end of, haven't got the bolts tightened up underneath and the bracket in the middle has been removed, can move it a bit but is solid enough, not gonna come off.
Just drilled through the mounting plate and bumper
That will get expensive very quickly with 8 aerocatches
Consider using only aerocatches on the visible bits and the regular type underneat/out of sight.
Matthew
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.