Jenvey Throttle Body complete setup!!

[DanClio]

Hi guys,

Unfortunatly due to a change in circumstances I am selling my complete throttle body conversion kit, this has been on my car for around 6 months and has covered just under 3000 miles. Its was fitted and mapped by Craig himself at AP-Developments and made 198.7BHP @ the wheels, with catcams high lift camshafts and no headwork. It will bolt diretly to a williams or 16v engine and will just require a remap depending on the spec of your engine.

I will split if I get enough interest in individual parts. This kit includes;

Jenvey Throttle Bodies (DCOE) 45mm
Ported and matched Inlet manifold
Jenvey Fuel Rail
Jenvey Trumpets
Jenvey Throttle position sensor
Jenvey Throttle cable linkage
Custom Throttle cable
ITG Airfilter
Weber Fuel pressure regulator
Custom APD engine loom, which will plug straight into the car loom
Custom Alloy radiator with fan
KMS Engine managment system with launch control, fully programmable
KMS Coil pack and HT leads
Megane flywheel, for ECU trigger pattern (Can be used without)
Megane Fuel injectors
All other bits included i.e. fittings and bolts etc.


I am looking for around £1800 for the complete kit and I will email pictures to anyone who PM's their email address (as I cant post pictures on here for some reason)

Here is picture of what they look like fitted.
http://www.williamsclio.co.uk/forum/viewtopic.php?t=27824

Thanks for looking
Dan

[stevie_b]

Please don't split for 24 hours or so - I may be interested, just gotta do some sums!

[AndyFielder]

interested in the radiator if there is no damage and the KMS stuff.. including loom

[DanClio]

Please don't split for 24 hours or so - I may be interested, just gotta do some sums!

No probs mate, if you send me your email i can send you some piccys

Cheers
Dan

[DanClio]

interested in the radiator if there is no damage and the KMS stuff.. including loom

Ok mate, If I get enough interest in the rest of the stuff I will consider splitting them, would rather sell as a full kit though.

Cheers
Dan

[AndyFielder]

i fully understand.

Andy

[stevie_b]

Hi Dan. Thanks for waiting and I can see you have other interest so I've come back as quick as possible... No need to keep the whole lot together for me anymore please as I've checked and some bits I needed are already sourced. I would still be interested in the radiator though (if you do split). Good luck with the sale.

[AndyFielder]

i would be happy with me having kms and you the rad, as i can only really aford one lot in one month.

Andy

[MicKPM]

IF you did break the kit up i'd be interested in the ITG and baseplate assembly.

Mick

[Matt_16v]

pm'd

[matty w]

is this to fit the megane head?would you sell without the management etc?

[seanofnp]

Jenvey Throttle Bodies (DCOE) 45mm
Ported and matched Inlet manifold
Jenvey Fuel Rail
Jenvey Trumpets
Jenvey Throttle position sensor
Jenvey Throttle cable linkage
Custom Throttle cable
Weber Fuel pressure regulator
Custom APD engine loom, which will plug straight into the car loom
Custom Alloy radiator with fan
KMS Engine managment system with launch control, fully programmable
All other bits included i.e. fittings and bolts etc.

price pls mate on all

[DanClio]

is this to fit the megane head?would you sell without the management etc?

Hi mate,

I will happily split as long as I get some interest in the management system and loom.

Cheers
Dan

[MattyH16valver]

=P~ must resist!

[AndyFielder]

i WANT THE MANAGEMENT AND LOOM!

[stevie_b]

I will happily split as long as I get some interest in the management system and loom.


i WANT THE MANAGEMENT AND LOOM!

And I'd like the rad please. :lol:

[cliolord]

:shock: what u doing kid?

[Oszy]

DanClio!

Is the kit still for sale?
I am interested in, and sent you an e-mail.

If you can please reply!

Thanks,
Oszy

[AndyFielder]

hes nor responding to me either.... i think hes waiting for info on a chap buying the throttle bodys.

Andy

[Oszy]

hes nor responding to me either.... i think hes waiting for info on a chap buying the throttle bodys.

Andy

Thanks Andy!
I will wait,
soon I must have a kit like that! :twisted:

[DanClio]

Hi all,

Sorry its been so long, both messages have been replied to :D

Regards,
Dan

[davem]

interested in the bodies if you still have them and are going to split.
Have cash waiting.
Thanks.

[AndyFielder]

interested in the bodies if you still have them and are going to split.
Have cash waiting.
Thanks.

sell me the electronics, someone else wants the bodys!

[evouk]

pm sent

[DanClio]

PM replied to :D

[stevie_b]

PM sent

[Oszy]

lets make a deal! :? 8)

[AndyFielder]

any news?

need the ecu etc ASAP now really!

[evouk]

dont suppose you have a lowered radiator do you???