DanClio
29-01-2008, 23:04
Hi guys,
Unfortunatly due to a change in circumstances I am selling my complete throttle body conversion kit, this has been on my car for around 6 months and has covered just under 3000 miles. Its was fitted and mapped by Craig himself at AP-Developments and made 198.7BHP @ the wheels, with catcams high lift camshafts and no headwork. It will bolt diretly to a williams or 16v engine and will just require a remap depending on the spec of your engine.
I will split if I get enough interest in individual parts. This kit includes;
Jenvey Throttle Bodies (DCOE) 45mm
Ported and matched Inlet manifold
Jenvey Fuel Rail
Jenvey Trumpets
Jenvey Throttle position sensor
Jenvey Throttle cable linkage
Custom Throttle cable
ITG Airfilter
Weber Fuel pressure regulator
Custom APD engine loom, which will plug straight into the car loom
Custom Alloy radiator with fan
KMS Engine managment system with launch control, fully programmable
KMS Coil pack and HT leads
Megane flywheel, for ECU trigger pattern (Can be used without)
Megane Fuel injectors
All other bits included i.e. fittings and bolts etc.
I am looking for around £1800 for the complete kit and I will email pictures to anyone who PM's their email address (as I cant post pictures on here for some reason)
Here is picture of what they look like fitted.
http://www.williamsclio.co.uk/forum/viewtopic.php?t=27824
Thanks for looking
Dan
Unfortunatly due to a change in circumstances I am selling my complete throttle body conversion kit, this has been on my car for around 6 months and has covered just under 3000 miles. Its was fitted and mapped by Craig himself at AP-Developments and made 198.7BHP @ the wheels, with catcams high lift camshafts and no headwork. It will bolt diretly to a williams or 16v engine and will just require a remap depending on the spec of your engine.
I will split if I get enough interest in individual parts. This kit includes;
Jenvey Throttle Bodies (DCOE) 45mm
Ported and matched Inlet manifold
Jenvey Fuel Rail
Jenvey Trumpets
Jenvey Throttle position sensor
Jenvey Throttle cable linkage
Custom Throttle cable
ITG Airfilter
Weber Fuel pressure regulator
Custom APD engine loom, which will plug straight into the car loom
Custom Alloy radiator with fan
KMS Engine managment system with launch control, fully programmable
KMS Coil pack and HT leads
Megane flywheel, for ECU trigger pattern (Can be used without)
Megane Fuel injectors
All other bits included i.e. fittings and bolts etc.
I am looking for around £1800 for the complete kit and I will email pictures to anyone who PM's their email address (as I cant post pictures on here for some reason)
Here is picture of what they look like fitted.
http://www.williamsclio.co.uk/forum/viewtopic.php?t=27824
Thanks for looking
Dan