PDA

View Full Version : Tightening torques



spryboy1974
24-01-2008, 20:21
Can anyone please tell me what the torque settings are on a willy lump.

Mains,big ends,head bolts and cam carrier. :D

MAXIBOY
24-01-2008, 22:19
Mains 60 to 65 nm

Big Ends 40 to 45 nm

Cam Carrier 8mm 24nm
6mm 10nm

Head Bolts Stage 1 30nm
Stage 2 angle tighten by 51 degrees +- 3 degrees
Stage 3 wait for 3 minutes minimum
Stage 4 loosen all bolts completely
Stage 5 25 nm
Stage 6 angle tighten by 108 degrees +- 3 degrees

spryboy1974
24-01-2008, 22:22
Thanks a lot Maxiboy,appreciate that! :D :D :D

richy
24-01-2008, 22:24
i agree with the mains settings, but im pretty sure the big ends are 40 - 45nm?

MAXIBOY
24-01-2008, 22:31
^^^^^^

yes there are misread them....

can they be altered then by a mod and added to the guides maybe.

thanks richy mate :oops:

richy
25-01-2008, 00:12
np only reason i noticed was i fitted my crank/rods just the other night!! :lol: