PDA

View Full Version : anyone got a sparco rollcage



geesus
11-01-2008, 13:03
put some pics up for me if you can

just deciding on what cage to buy, omp or sparco :?

AndyFielder
11-01-2008, 13:18
i have one mate, not fitted tho.

I think it is a better cage, the diagonal and door bars are removable and the front section can be left off too..

Mine isnt fitted, as im having issues getting it painted, mainly caused by the bloody rain!

Andy

Matt_16v
11-01-2008, 13:23
from what I could see, Sparco is better made and in more of a kit form where as the omp is all one piece.

geesus
11-01-2008, 13:58
got any pics of it andy?

was it 6 point or 8 point? where you get it from? sorry for all the questions :oops:

yeh looking at the pdf ive got it looks like a good cage, just fancy something other than omp if i can :roll:

AndyFielder
11-01-2008, 15:08
6point my one is.

I cant work out where omp get there extra 2 points from.

Andy

Matt_16v
11-01-2008, 15:10
think they include door bars as a point?

geesus
11-01-2008, 15:17
the sparco one on my pdf is 8 point but it has fixings at the original upper seatbelt points which make up the 8

i think the omp ones have fixings at the sunvisor points?

if you could get me some pics andy that would be great? where did you get it from? ive found a 6 point one on peter lloyd rallying

does yours look like this with the door bar extensions and bar across the 2 uprights? as thats the design i want :D

http://i4.photobucket.com/albums/y105/geesus69/clio/rollcage.jpg[/img]

richy
11-01-2008, 20:05
mine is a omp cage and all the door/diag bars can be removed aswell as the front section!

Allan
11-01-2008, 20:33
which cages go through the dash ?

you could also try saftey devices they do a clio cage, ARJ has one

MAXIBOY
11-01-2008, 22:42
weld in or bolt in mate

http://www.balancemotorsport.co.uk/search.asp

cliorod
12-01-2008, 19:42
A few pictures of a "SPARCO" weld in cage ~~ hope it is of use.

http://i67.photobucket.com/albums/h305/Cliorod/Picture210.jpg


http://i67.photobucket.com/albums/h305/Cliorod/Picture211.jpg


http://i67.photobucket.com/albums/h305/Cliorod/Picture209.jpg

Excuse the "state" of the car :oops: :roll: :oops: ~~ a very ongoing project :cry:
It WILL be mint when it is done :wink: :lol: 8) ~~ later this year

MAXIBOY
12-01-2008, 22:24
was it only the works cages that picked up the rear suspension points

cliorod
12-01-2008, 22:34
Dunno Maxi !!!
The shells used to come complete ~~ seam welded and strengthened with the various gusset plates etc and the cage welded in ~~ these were supplied by Matter. am not sure whether or not Matter did the MAXI shells either.

MAXIBOY
12-01-2008, 23:00
http://i36.photobucket.com/albums/e15/123maxiboy/1ca7d18f.jpg

http://i36.photobucket.com/albums/e15/123maxiboy/a8308484.jpg

like that pick up the rear axle mountings