View Full Version : Williams 1 immobiliser
Nickysteveo
08-01-2008, 16:03
Does anyone have any information on the factory fitted immobiliser on the Williams 1.
I have lost the fob for mine and I'm afraid all I know is that it was a gemini. Renault are know help on this.
Would appreciate any help on this .
thanks
Nick :roll:
all the info i have is same as you know
i have some crap bit of recite from 94 that just says gemini and a date no model number iirc
thats all i can tell the insurance ppl when asked
good luck
Nickysteveo
08-01-2008, 17:14
Hi
thanks for response.
I don't suppose you know how easy it is to do away with the immobiliser if I can't get a fob replacement?
MatBrown
08-01-2008, 20:08
Was it the plug in chip next to the front foglight switch?
Mat.
Nickysteveo
08-01-2008, 20:44
No
It had a plug in below right of the steering wheel column.
MatBrown
08-01-2008, 21:02
No
It had a plug in below right of the steering wheel column.
Below right of the steering wheel?
Isn't that where the front foglight switch is?
Mat.
get rid and get a TOAD AI606 fitted!
Nickysteveo
09-01-2008, 10:50
Mat
You may be right, i never had an oppertunity to use the fogs, so can't really remember. I did think they were in the bank of switches with the hazard etc in the middle above the radio. The car is with Renault at the moment so i cant check. If it is the one you are thinking about, do you have any information on it.
Cheers
Nick
MatBrown
09-01-2008, 19:08
Yes mate, but i won't post it up on here for all to see.
PM/call me.
Mat.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.