View Full Version : Taking front wing off
KingStromba
08-06-2005, 20:05
I want to take it off. Bolts on top.
Then what?
Jabba the...
08-06-2005, 21:16
take inner plastic shit off, rip free from sealent, could use a heat gun/hairdryer if u need :!:
KingStromba
08-06-2005, 21:21
ooo sounds like hard work. :roll:
MatBrown
09-06-2005, 01:14
Not really, you'll cope easily and will find loads of shit behind it.
Mat.
Not really, you'll cope easily and will find loads of shit behind it.
Mat.
Dont u mean rust mat ?
MatBrown
09-06-2005, 11:28
Nah, just mud and stuff, usually wedged between wing and front of sill.
will eventually rust though.
Mat.
KingStromba
09-06-2005, 11:31
So what do i do after undoing the 3 bolts at the top?
MatBrown
09-06-2005, 11:40
Do you not have a Haynes manual?
Mat.
KingStromba
09-06-2005, 12:09
Yes but its shit. Easy to follow if you already know what you are doing.
MatBrown
09-06-2005, 13:36
Rite,
Well the scuttle panel needs to come off, splash guards from in wheel arch and front bumper.
Screws located along the top, 4 i think, 1 at front behind bumper, 1 at bottom next to sill and one inside wheel arch just in front of door.
Mat.
KingStromba
09-06-2005, 13:45
When i put it back on, do i have to glue anything?
MatBrown
10-06-2005, 01:11
As Lunner said, the stuff that's on there will still be sticky anyway, it's like the stuff behind the doorcards.
Mat.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.