Name that manifold

[Allan]

Ok right i have this exhaust manifold, not sure what it is, other then covered in exhaust paste lol
Pics are at

http://www.niggy.co.uk/pics/exhaust/

anyone seen this 4 - 2 - 1 exhaust manifold before?

ARJ has an idea but will see what you all think, haven't linked the photos as they are large

[cliokongen]

It routes the same way as a Devil manifold.
But it doesn't have the Devil ID plaque on it.

http://i50.photobucket.com/albums/f312/Cliokongen/Devilmanifold.jpg

Michael

[cliokongen]

And its not a Supersprint or Renault Sport item.

http://i50.photobucket.com/albums/f312/Cliokongen/EliaSupersprintogRenaultSportmaninf.jpg

Michael

[Allan]

ARJ thought it could be a devil, might warrent taking it off cleaning it up and looking for some evidence

[stan]

looks "home-made" with an adapted valver down pipe.

[DanClio]

Is it just me or can no-one else see that plate on the branch which clearly says "devil" on it :?

Dan

[DanClio]

oops looking at the wrong pic :roll: lol

Dan

[cliokongen]

looks "home-made" with an adapted valver down pipe.

It does indeed....

Michael

[Allan]

so just a copy :D

[drsmith1979]

anyone ever tried making their own downpipe? seems to be loads of people on here after one, if the club got a 'master' made up im sure there would be enough interest to get it fabricated on mass? relatively speaking

[Allan]

i think it was looked into a few years back, when everyone was raving on about blue flame, not sure anyone actually had one made though.

[drsmith1979]

surely cant be that hard, its the shortest part of the whole system! a little bend here and there, 2 flanges and a lambda sensor threaded hole! is it made of thicker stuff?

[drsmith1979]

anyone got a spare one, i dont mind popping down to blue flame in skem or doing some leg work on it

[Allan]

aye but which down pipe do you get done, a valver? or a williams as they are both diff or get a whole devil / super spring manifold and down pipe and copy it.

lots of options there really :D

[drsmith1979]

well i would do the willy one first as thats the one people want for their modifications etc.... hence being in short supply, cant be too hard.

[cliokongen]

You could do it as the one from Devil - one downpipe for both the Willi and the Valver. Make a flange with both set of holes.

http://i50.photobucket.com/albums/f312/Cliokongen/Manifold10Small.jpg

Michael

[Allan]

also the welds on the back of the manifold are from when it was repaired as it was blowing

[drsmith1979]

ooh like the sound of a 'joint' application, sure theres some money to be made in this 8)