View Full Version : Door Lock Actuators
Hi Guys my passenger door lock actuator has given up the ghost so never unlocks or locks wondered where the best place to get hold of these was? Renault sell them for £54+ VAT aparently according to renault need to find out which make was used on my williams 2 CIM or VACHETTE
thanks
James
I just got a 2nd hand one off matbrown.
There are two different types though, lucky for me i could just swap the required parts over and be done with it
Looks like need to take door appart to get it sorted then, thanks Lunner
Hi Guys my passenger door lock actuator has given up the ghost so never unlocks or locks wondered where the best place to get hold of these was? Renault sell them for £54+ VAT aparently according to renault need to find out which make was used on my williams 2 CIM or VACHETTE
thanks
James
You mean the solenoid? Just refitted a 2nd hand one to my drivers door. Fixed central locking. I have a passenger one spare. You are in the same town as me...
Looking for one myself can anyone please help, my passenger side door does not lock.
Its so annoying locking the car with the remote and then having to use the key to lock the door.
MatBrown
02-01-2008, 20:17
I have one.
Mat.
Got round to taking door apart and found a Rookwell actuator in passenger side door. code on it was: PA66GF30 also had ABS - France on it. Does anybody have one of these according to renault can't mix and match the two makes of actuators that mad it in to the mk1 clio.
I changed mine from a CIM on to a renault OE one. It came with the complete harness for the door, not just the little motor/actuator. Went in fine, connected the rods np.
Does any body have a Rookwell actuator for passenger side door. code: PA66GF30. Don't really want to take whole lock unit apart if can just swap like for like.
http://i155.photobucket.com/albums/s309/J_A_R_B/IMGP0790.jpg
http://i155.photobucket.com/albums/s309/J_A_R_B/IMGP0789.jpg
regards
James
stevie_b
08-04-2008, 23:34
This was the one I was holding for you - PA66GF30 - think we had a communication breakdown along the way. I know I certainly got all in a muddle when the forum disappeared so apologies if I dropped the ball somewhere. Here it is:
http://i83.photobucket.com/albums/j299/2stis/door_solenoid.jpg
Hi jamie, sorry for delay, and shit pics...everything is a bit of a rush right now:
http://i174.photobucket.com/albums/w102/barneywobba/DSC00383.jpg
http://i174.photobucket.com/albums/w102/barneywobba/DSC00384.jpg
http://i174.photobucket.com/albums/w102/barneywobba/DSC00385.jpg
Actually fitting the door lock mechanism is very simple, cant be much harder than just doing the motor part.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.