View Full Version : Oil cooler removal help
phantome46
19-12-2007, 17:59
I have removed my oil filter and now would like to remove my oil cooler. There is a bolt in the middle of the cooler once the filter is out of the way which on mine seems very tight?
Is this a reverse thread or are they sometimes on very tight?
Any tips??
no its not reverse ,just fit a proper socket on there and
make sure it dont slip .
if you intend to leave the cooler off you will need a shorter bolt
if you intend to leave the cooler off you will need a shorter bolt
bitch :tongue3:
phantome46
19-12-2007, 19:54
are they normally tight? It seems to be one there with some force!
AndyFielder
19-12-2007, 21:05
I can get you a shorter bolt if you want... PM me
are they normally tight? It seems to be one there with some force!
yeah they can be a right biatch when over tightened putting them on.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.