12.9 or 10.9 Bolts... WHERE FROM!

[AndyFielder]

Where do i get these from, been hunting the net, found a few sites, none have prices or the right sizes for me.

I need to replace every bolt on the block.

Im going for high tensile BZP bolts if anyone can help.

The M10, M8 Number is the diameter of the bolt? Are these what im after for mine? Dont need order any funny shaped/sized ones.

Andy

[MAXIBOY]

hi mate..

only the black ones are usually 12.9,s but some times stainless and Bzp are too. are you just changing them for looks as most standard are 8.8.

are you going allen bolts or metric bolt headed ones.

all renault bolts are metric. 5mm 6mm 8mm 10mm. i bought a job lot then filled in the gaps. all mine are allen types. i bought bulk stainless nuts from screwfix as they are the cheapest and certain bolts then shopped around for the rest as i needed them.

http://www.fastfixdirect.co.uk/default.asp?PageName=Home

http://www.thesitebox.com/Category/5232/nuts-and-bolts.aspx?utm_source=yahoo&utm_medium=cpc&utm_term=Nuts%2Band%2BBolts&utm_content=Nuts%2Band%2BBolts&utm_campaign=Nuts%2Band%2BBolts&OVRAW=Nuts-And-Bolts&OVKEY=nut%20and%20bolt&OVMTC=standard&OVADID=4470413031&OVKWID=32725308531

http://www.avonstainlessfasteners.co.uk/

http://www.stagonset.co.uk/fasteners?output_frontpage=yes&clickthrough=adwords&keyword=metric%20nuts&gclid=CPXJo7Xa_4wCFQNQEgoddx8MDw


http://www.screwfix.com/app/sfd/cat/home-main.jsp;jsessionid=TTXTL5A0VNNLTCJO2C1CIIQ?screwf ixHomeTab=screfixHome&ts=28601

[AndyFielder]

i was just going to do like for like on the bottem end.

The ones they use are 10.9 i think.

Im doing it so there isnt an inch of corrosion on the engine when i put it in.

Andy

[AndyFielder]

still the same problem maxi... no 10.9

[MAXIBOY]

i replaced the bottom bolts in the main bearings caps with 12.9 ones...

[snowman]

http://www.western-towing.co.uk/acatalog/Nuts_Bolts.html