View Full Version : Willy Suspension Overhaul
What is the usual course to take in renewing the front end? The knock on the passenger sides getting worse now so I'll need to do this fairly soon..
Shocks, (springs I have)...
What should I be looking at?
Ta chaps
Full brand new set up i would do.
Trackrods, steering arms, wishbone to subframe bushes, ball joints, inner roll bar bushes, outer roll bar bushes, top mounts, springs, shocks and steering column.
Love northy
:cry: :cry: :cry: :cry: :cry:
That looks tres £££
You can fook off the steering column this ones perfect!
only perfect ones are brand new ones daz, there are alot of bearings in the column that when u swap a new one u know that it was £130 well spent.
n theres me thinkin they were u/j s ;)
Its only 3 years old max thought this one - I've got a reciept somewhere...
You've done all this on Andy's - how much am I looking at in parts?
if its only 3 years old that it would be absolutely stupid to replace it! just do all the bushes, top mounts shocks, ball joints ect
Id just do the cheapest stuff first until the clonk goes :lol:
What is the usual course to take in renewing the front end? The knock on the passenger sides getting worse now so I'll need to do this fairly soon..
Shocks, (springs I have)...
What should I be looking at?
Ta chaps
sounds like a scrap heap, get rid! :wink:
Its only 3 years old max thought this one - I've got a reciept somewhere...
You've done all this on Andy's - how much am I looking at in parts?
eye - 0171 had all the above plus uprated suspesnion bushes
What is this word that you use... this up..ra..ted?
AndyFielder
04-12-2007, 10:25
I spent the best part of £500 on my front end when i came to sort it out.
New ball joints, track rod ends, ARB bushes, new wheel bearings and a 19mount i think... its not that bad!
Andy
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.