PDA

View Full Version : changing fuel pump ph1



matty w
27-11-2007, 23:56
i've got a ph1 with the sperate pump i've got it out of the tank but to remove the outer plastic casing do i have to drill the rivet thats on the end of the housing?

MAXIBOY
27-11-2007, 23:59
yes mate. you have to remove the outer plastic casing. i think the rivet type thing pulls off and can be replaced with a small cable tie on the leg.

matty w
28-11-2007, 00:20
yes mate. you have to remove the outer plastic casing. i think the rivet type thing pulls off and can be replaced with a small cable tie on the leg.

cheers mate i wernt sure if the rivet thing needed drilling out

BristolSam16v
28-11-2007, 12:13
Couldn't get the rivet out on mine in the end the end snapped off :'(

If that happens you could try drilling a small hole through the tube and putting a small bolt/nut there, that would hold the casing up firmly.