PDA

View Full Version : Clifford alarm after engine re-fit?


Bailey_1260
24-11-2007, 15:17
recently swapped my engine as the old one was knakred, not tried starting it yet but was womdering, i have a clifford alarm and foxgaurd (IIRC) immobiliser.

Are these spliced into the engine loom any where? as i am not using the original loom for the car also on the same note what problems should i expect from not using an orginal loom?

Cheers Bailey.
madman1981
24-11-2007, 16:54
Most alarms are fitted well before the engine part of the loom
Rich
24-11-2007, 17:50
either way i'd use the loom from the car or you are likely to run into problems mate.
Bailey_1260
24-11-2007, 19:23
either way i'd use the loom from the car or you are likely to run into problems mate.

The loom was one of the problems in the first place. :D
Bailey_1260
25-11-2007, 11:16
What sort of problems am i likely to run into by not using the original loom? and are they easily sortable?

is a ph1 16v with a willy 2L and ECU.