PDA

View Full Version : Driveshafts



KingStromba
06-06-2005, 16:50
How easy is it to change them?

BenR
06-06-2005, 21:01
very.

4 bolts per side, and 3 bolts on nearside DS gearbox gaitor.

VIPERONE
06-06-2005, 21:21
only difficulty is seizedroll pin or bolts in suspension, otherwise 30-60 minjob :-)

Winston
06-06-2005, 21:22
Remember the gearbox fliud when undoing the passenger side shaft

I always forget lol :oops: .....makes a real mess

Mark_Ritchspeed
06-06-2005, 21:24
Yep, seized rollpin can be aright pain in the arse. Kangoo box doesnt run one and no probs so far. :D

KingStromba
06-06-2005, 21:29
Might give this a go.

BenR
06-06-2005, 21:51
get yourself some plus gas and a selection of punches, that'll get the roll pin out no probs.

KingStromba
06-06-2005, 22:24
And that is?

richy
06-06-2005, 22:29
why do u want to take them off? if theres nothing wrong down touch them ffs

KingStromba
06-06-2005, 22:29
They arnt new :D

BenR
06-06-2005, 22:37
plus gas is a good penetrating fluid, like strong wd40....shifts rust.

Punches are well ,punches.....metal sticks

KingStromba
07-06-2005, 00:26
Anyold metal sticks? :D

BenR
07-06-2005, 00:29
if they are the right diameter, yea why not

2 live
07-06-2005, 10:26
i find a ground down old phillips screwdriver is ideal....for the roll pin