View Full Version : No spark
lukebartlett2405
16-11-2007, 20:45
Put a williams engine in a valver today both engines where working when in the cars.
The hybrid now dosnt have a spark what should i check ?
cheers :D
that the loom is plugged in the correct plug on the coil (one is blank) failing that dizzy, rotor, leads plugs
lukebartlett2405
17-11-2007, 09:16
checked all of that its fine
could it be anything to do with the imobaliser
could be if its disarmed (obviously) have you used the loom from the engine or from the car?
http://s51.photobucket.com/albums/f360/Clio16v-widetrack/?action=view¤t=coil.jpg
lukebartlett2405
17-11-2007, 18:19
from the williams engine
you might need to revert back to the 16v loom then, if you compare the loom connections(brown and white blocks) they can vary in pin locations, causing problems!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.