View Full Version : Just washed
http://cgi.nickywitts.plus.com/uploads/cleaned01.jpg
http://cgi.nickywitts.plus.com/uploads/cleaned02.jpg
http://cgi.nickywitts.plus.com/uploads/cleaned03.jpg
http://cgi.nickywitts.plus.com/uploads/cleaned04.jpg
http://cgi.nickywitts.plus.com/uploads/cleaned05.jpg
http://cgi.nickywitts.plus.com/uploads/cleaned06.jpg
http://cgi.nickywitts.plus.com/uploads/cleaned07.jpg
LotuzClioWilliams
16-02-2005, 19:06
Nice pictures, but please don't start that CS "just washed my car" bs on here. :roll:
love it pal!! will be sweet as when the backs done, thats all it needs to finish it off!
KingStromba
16-02-2005, 19:47
Thank ****, thought it was going to be a 182 thread.
MatBrown
16-02-2005, 20:42
I think we need to get Winston some artificial legs, cos he's either very short or hasn't got any!
Mat.
PMSL
I was thinking the same thing Mat.
very nice mate.
you'll have to get the tailgate windscreen wiper hole welded up.
(just so happens i have a welder)
VIPERONE
17-02-2005, 13:38
there isnt a hole! there is a bung in!!
Everyones getting at you today northy mate arnt they. PMSL
not fussed....lol Atleast i havent got my coat as many times as ks.
but to get one on gunner....to have a bung fitted u need a hole.
So if he wants i can weld a piece of new metal in...all he has to do is filler and paint it.
Smooth carbon tailgate :D - On its way
proof that im 6 foot, odd lol
http://cgi.nickywitts.plus.com/uploads/cleaned09.jpg
http://cgi.nickywitts.plus.com/uploads/cleaned10_copy1.jpg
http://cgi.nickywitts.plus.com/uploads/cleaned11.jpg
Buckets still need to go in yet
http://cgi.nickywitts.plus.com/uploads/cleaned12.jpg
http://cgi.nickywitts.plus.com/uploads/cleaned13.jpg
not fussed....lol Atleast i havent got my coat as many times as ks.
but to get one on gunner....to have a bung fitted u need a hole.
So if he wants i can weld a piece of new metal in...all he has to do is filler and paint it.
Working as a design/production engineer I have to disagree with your idea. Welding, would pull the metal in on the tailgate meaning lots of filling and a larger area to make good. When I did my flush tailgate (which is still in shed LOL) I was advised by a bodyshop to bond a plate of the inside and then locally fill the area. This results in a lot lot better finish without the distortion the heat from the welding torch would cause.
Me and my mates bonded 2p's to delock are novas lol never again :lol:....best left to the pro's
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.