PDA

View Full Version : Stereo/6x9 speaker troubles


MattyH16valver
02-11-2007, 22:31
My willy came wtih a Kenwood Head unit + Amp + 6x9 speaker....I was'nt overly fussed about having the amp and speaker, but I thought I may aswell use them as there installed.
The problem with the system is that when you turn it up to a reasonable level the 6x9 speaker seem to cut out completely and you have to turn the system right down for them to come back on again. If they dont't do this then they just keep cutting in and out. I've checked the fuse on the amp and also the power lead near the battery.....Any ideas anyone?.....
BRUN
02-11-2007, 23:00
turn the gain down on the amp, it should never be on max, keep it still fairly low if you can and use the volume on the H/U more
MAXIBOY
02-11-2007, 23:10
sounds like you coils are shorting in the speakers time for a new set.
MattyH16valver
02-11-2007, 23:28
Ok lads...cheers...think i'll test the speakers first then....
BRUN
02-11-2007, 23:29
look at what the gain is set to on the amp, its only a dial !
MattyH16valver
02-11-2007, 23:53
Was neither of these....just tried some other 6x9's I have...still cuts out...and I turned the gain right down to nothing...still the same :cry:
MAXIBOY
02-11-2007, 23:55
hmmm. ............odd. maybe the amp is cutting out. can you try the speakers on the head unit..
MattyH16valver
02-11-2007, 23:58
hmmm. ............odd. maybe the amp is cutting out. can you try the speakers on the head unit..

Ok bud...cheers
BRUN
03-11-2007, 00:30
is the earth good, needs to be A1
MattyH16valver
03-11-2007, 00:51
is the earth good, needs to be A1

I'll check that too then.... 8)