PDA

View Full Version : just got myself some....



plunky
29-10-2007, 23:42
willy wheels!! at last!
badly need a refurb though!! but at £175 i thought it was a bit of a bargain...
how much do you guys think it would cost to get them refurbished in white?

1995clio16v
29-10-2007, 23:51
Why not have a go yourself?

Personally unless you know someone who can do them, it will just be another job to them and they prob wont do a job like they would if they were their own wheels! Thats only my opinion on things like this!! Youd be looking at quite a bit id imagine.

It will be a lot cheaper.

You might want to get them dipped in acid for a fresh start if they are badly corroded.

Bargain tho id say!

drsmith1979
30-10-2007, 02:53
get them blasted and high build primed then do it yourself like most of us do ;o)

Tullyvernon
30-10-2007, 10:10
I got quoted £60 a wheel for mine with a company in lisburn, suposed to do a good job. Think il tackle them myself when i get time. :D

plunky
30-10-2007, 10:42
where ca you get them blasted? is this expensive?

Wobba
30-10-2007, 15:07
Theres quite a few posts about how to refurb wheels. If you find a good place that does em, tell me. I am in Hampshire too, and may get some willy wheels. Saying that I am sure some of the others down our area may know a place or two...

dan-hipgrave
30-10-2007, 18:07
Whereabouts in Hampshire are you? I know a place in Basingstoke that refurbs wheels...

FATBOY
30-10-2007, 18:16
£50 a rim is about the going rate per rim. wouldnt pay anymore TBH

drsmith1979
30-10-2007, 20:31
theres a place in warrington that will blast, high build prime and powder coat the wheels to any colour for circa 25Quid per wheel. blasting and priming ranges anywhere from 10quid-20quid per wheel depending on where you go.... GazTwo recommended the local guy to me and hes a great chap and did it in a few hours for me! cash in hand obviously 8)

plunky
30-10-2007, 21:09
Whereabouts in Hampshire are you? I know a place in Basingstoke that refurbs wheels...

whats the place called, basingstokes not that far form me.

Wobba
30-10-2007, 22:43
theres a place in warrington that will blast, high build prime and powder coat the wheels to any colour for circa 25Quid per wheel. blasting and priming ranges anywhere from 10quid-20quid per wheel depending on where you go.... GazTwo recommended the local guy to me and hes a great chap and did it in a few hours for me! cash in hand obviously 8)

Everything is way up north...especially if you live in Southampton.

plunky
08-11-2007, 12:16
Whereabouts in Hampshire are you? I know a place in Basingstoke that refurbs wheels...

whats the place called, basingstokes not that far form me.

???