PDA

View Full Version : williams starting prob


pthev
19-10-2007, 21:33
it does start but takes a while and seems to choke its self for a few minuites or so. any ideas it gets worse when hot
C5 SWH
19-10-2007, 22:03
Could just need a service? Is it due one?
BRUN
20-10-2007, 13:28
i had a starting problem with mine were it would turn over but not fire up, mine turned out to be the coil after i replaced every sensor on the car lol

could be the TDC sensor, measure its resistance, IIRC its supposed to be about 175ohms but dont quote me on it
pthev
30-10-2007, 20:02
its not due a service. i have replaced most things including plugs leads temp sensor ecu checked by ecu doctor. it is also very lumpy on idle and seems to be lacking in power. thinking it may br coil as told or idle speed control valve. pls help as i havent drove it for weeks now. thanks paul :(
Wobba
30-10-2007, 23:09
Give the ISCV a good clean with carb cleaner and careful application with a cotton bud or 10. Really easy.
BRUN
04-11-2007, 15:36
yup clean the ISCV out for definite, i seem to do mine every year