PDA

View Full Version : door panels ?



LEEDASH
17-10-2007, 18:47
can some one give me advice on how to remove the door panel inside.I need to replace locks ?

Lunner
17-10-2007, 19:31
unscrew speaker, door pocket including divider, unscrew release handle and unhook from operating rod, prise handle apart and unscrew, and then just pull, will have shit loads of shitty mastic round it

LEEDASH
17-10-2007, 20:16
Cheers,what job's involved in changing the door locks,pretty easy ? got aftermarket central locking,will it affect it ?
what about changing ignition got one all complete with two block connectors ?

Lunner
18-10-2007, 18:42
They are a bastard to get to, have to unclip the operating rods, prolly easier to unclip from mechanism first, then they have a clip holding them in the door.

Ignition - Remove all plastics around it and unplug existing one, then as you turn the key to ignition on position(with it unplugged) you need to use a screwdriver or something to push the locating lugs in and then slide it out.

Central locking won't be affected if you have after market

LEEDASH
18-10-2007, 19:20
cheers for the advice,lunner,wouldnt mind some diagarms or pics to make it a wee bit easier for an amateur

Lunner
18-10-2007, 19:48
Can't draw for shit, easy enough mate, just look at it and work out what is in the way or holding it on

LEEDASH
18-10-2007, 20:16
Cheers for help