View Full Version : Fuel pumps
How many differant types of fuel pumps have been fitted to valvers and williams ???
The one in my race car is a pcb type with a plastic cap that slides up and down to pump fuel.
I have a williams one which is totally differant to the valver one with two outlets and more connections to the loom....
Does anyone know if u Can u make a williams one fit a valver one ?
BristolSam16v
01-10-2007, 11:14
The one I had in my J-reg was completely different as it was seperate to the sender, but afaik the only difference is the casing? The pump itself is the same?
May require some botching to make it fit, I had to wrap mine in bike tubing as it was meant for newer models which had smaller pumps but it still works perfect.
many tuned cars uses walbro uprated fuel pumps.
can these pumps be used on the mk1 clio's?
yes i have one fitted from an evo.
in my valver, the part number on it is the same as off a Williams, and AFAIK its the OE factory fitted pump
mines a K reg
yes i have one fitted from an evo.
ok tnx :D
maxi can u get a picture of the top of your pump please ?
http://i36.photobucket.com/albums/e15/123maxiboy/Picture150.jpg
http://i36.photobucket.com/albums/e15/123maxiboy/Picture154.jpg
http://i36.photobucket.com/albums/e15/123maxiboy/Picture168.jpg
that help mate.
cheers.
so does that tank of yours have two pumps ???
What pump is that u have pictured as it looks sod all like mine internally. Externally its the same - 3 connector and one outlet.
no its an early type tank and has separate pump and fuel sender.
its an evo pump fitted in the original housing
What is it your trying to do on yours Northy?
Mmm so the other one maxi is just the float ?
How do i know what tank i have mate - when u lift the inspection all i see is one pump or float thing with 3 connectors and one outlet. When i changed this for a spare one the car would start again.
Stan - my fuel pump is broke on the cup. I have a replacement out of the ex hybrid and its now fine but i want a long term solution plus i need to refit the exhybrids pump at some point. i bought a replacement upgrade from demon tweeks and its sod all like mine inside...so i wanted to know if i can convert my internals to a williams standard.
I would hazard a guess that the actual pump will be inter-changeable...the housings and senders may be different, but the pump will be the same.
BristolSam16v
02-10-2007, 14:46
the pump on mine was different, I had to take the plastic housing apart and bodge the walbro pump in there as it was a different size, works fine though.
yeah there might be slight differences, but basic fitment is near the same.... any case u can MAKE them fit easy enough.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.