PDA

View Full Version : Someone with Dialogys... Front Stub Axles/Hubs



summeh
08-09-2007, 22:33
Can someone with dialogys please check reno part numbers for the following please?

I am trying to work out if the front stub axles (things the hubs are pressed in to) are the same across the Clio range.

Not the hubs, the stub axles.

If someone could check for a standard 1.4/1.2 and valver/williams that'd be great, cheers.

Justin..
08-09-2007, 23:46
theyre not. plus on the lower spec they use different strut spacings. this is something i know w/out lookin at dialogys. hubs are the same just stubs arent

summeh
09-09-2007, 03:41
woot about R19's ?

u33db
09-09-2007, 08:52
If the stubs are 54mm they'll fit fine so that includes some RT's, 19 16vs, 5, Extras etc.

The basic shape is always the same, they just vary by strut spacing abdn bearing size.

northy
10-09-2007, 08:25
they arent - i got some hubs but the bearings and hub part are smaller than 16V

do u need some hubs ???? i might have two spares pal ?

summeh
10-09-2007, 09:07
so k i got some now cheers anyway mate.

u33db
10-09-2007, 13:28
they arent - i got some hubs but the bearings and hub part are smaller than 16V

do u need some hubs ???? i might have two spares pal ?

What do you mean but the hub part?

You get different bearing sizes yes but if you get the correct bearing for the carrier it'll still go on a 16v fine.

Justin..
10-09-2007, 17:22
as long as strut spacing is same as the shocks ^