PDA

View Full Version : 200+ bhp\tonne hybrid 0 - 100 fastest vids yet!



Mr.AdamB
08-09-2007, 13:58
well i went to were i work and there is a long runway there its flat tis an old airfeild.

took all the junk out my car, low petrol and heres the results.

0 - 60 is in the 5.6s

i got the 0 - 60 time from my editing software croped it to wen the camera moves slightly (when i launched) to wen i hit limiter is 2nd (62mph)

1st time i actualyl give it propper welly since extra lightness!!! and i tell it is rapido.

VIDS:

warm up run:
http://www.youtube.com/watch?v=uk8qlvI8Dl0

fastest Run ive done so far!
http://www.youtube.com/watch?v=yl1Z-DWni6I

i fookin love it!!! cant wait to see wat 1st gear like with my fullslicks :D

dhay14
08-09-2007, 18:45
nice :)

Imperial_16v
08-09-2007, 21:23
F00k that looks quick!

Yamaha_YzF-R1
08-09-2007, 22:24
DAMN! that's the fastest clio I have ever seen! In my language I would say "Evala Evala strahotno" :P your car si magnifisent! what have you done to it? did you lighten up the interior? :)

Martin
08-09-2007, 22:33
looks similar to my old cars mate....13s are on! 8)

Yamaha_YzF-R1
08-09-2007, 22:44
I forgot to mention earlier - Mr.AdamsB the next time you pass by that runway you could film a 0-200++++ run this time :) Your clio is very fast and I just shut my friend vauxhall/opel fan's mouth ;) 10x very much!!!!!

Mr.AdamB
09-09-2007, 02:03
thanks i couldnt quite beleive how fast it was my self wen i watched thwe vids feels rly fast!!2nd vid needle just over 100 at 13.3 so.... :D

got few more things to lighten it! will get it down to 840ish before i put the cage in there. cuz i want it at 860kg WITH the cage :)

mods many mods just ITG panel filter, fog air scoop 85mm ducting
gunenr chip
decat and SS magnex atm
also valver mani (which i swear is restricting it)

RR at 177 bhp 160lbs/ft 142 atw. 210+ bhp\tonne
and i think this vid is proof enuf for its power!

Yamaha_YzF-R1
09-09-2007, 14:58
You're sick man! SICK! ;) Oh and by the way when I said to do a 0-200 I ment 200 km/h not mph ;)

Yamaha_YzF-R1
09-09-2007, 14:59
Hahahahah I wrote s i c k and look what is shown :) Jolly Good Show Old Boy :P

richy
09-09-2007, 16:24
lol sick :wink:

Yamaha_YzF-R1
09-09-2007, 17:52
Very neat :)

northy
10-09-2007, 08:18
8)

Yamaha_YzF-R1
10-09-2007, 20:22
8)
I ment that in the good way of course :)

bluenose
10-09-2007, 20:56
:shock: Fair play, looks set to be a right weapon! 8)

Yamaha_YzF-R1
11-09-2007, 09:34
Mr.AdamB I'll be expecting a top speed video from you lad :)

Mr.AdamB
11-09-2007, 15:44
tops out at 139 on gps need to put diff manifold on tehre, then i will make 1

Yamaha_YzF-R1
11-09-2007, 16:52
Damn, 139 and you want more? :)

J o n
12-09-2007, 13:43
looks rapid mate!

summeh
15-09-2007, 03:24
Does look very quick. good way of measuring it as well. Will have to try that myself :lol:

Some slicks should cure the wheel spin in 1st, so long as they are up to temp first!

177? where was that RR'd? I wouldn't have thought that much from just those mods? It is just an estimation though.

summeh
15-09-2007, 03:35
btw hope you are coming to pod on the 14th october ?

Mr.AdamB
15-09-2007, 10:23
yeah ill be there on the 14th am going on 22nd nxt sat as well for sum practice runs.

yeah i take that RR figure with a pinch of salt but they was quite accurate wen RR my valver... deffo sumthing around that. powerfull standard!! vid prooves it.

got a few more bits to do yet! wat atleast another 10kg lighter without removing bonnet or anything liek that
:)

Yamaha_YzF-R1
07-11-2007, 17:14
Mate, how's the stripping going? did you lighten the fat lady up? :)

Yamaha_YzF-R1
07-11-2007, 17:26
tops out at 139 on gps need to put diff manifold on tehre, then i will make 1
On gps 139, what was the speedometer showing then?

Mr.AdamB
07-11-2007, 18:21
145ish expect to get 142on gps once new manifold is on then it will go thru the the limiter at 7.1 will prob read just over 150 n the speedo.

Yamaha_YzF-R1
08-11-2007, 18:58
Increnible! :) cheers

david932
11-01-2008, 19:55
looks rapid fella! what have u ripped out/repaced to get it to 860kg?

Yamaha_YzF-R1
03-02-2008, 09:01
Mr.AdamB I saw that you have put a f7r manifold - we all are awaiting a new 0-60 and top speed vids now when nothing is restricting you ;)

Mr.AdamB
03-02-2008, 11:36
erm car in bits atm :evil:

Yamaha_YzF-R1
03-02-2008, 12:15
why?

Mr.AdamB
03-02-2008, 13:56
had a wee stack, lost it on a bend a 60 changign gear... was flat out tho oops. soon as i went into 3rd it just lost the backend so fast, also was a bit wet but o well.

i have a project theat on clio16ver i will register for a payed member on here soon :) then start another thread up wooo

Yamaha_YzF-R1
03-02-2008, 17:46
had a wee stack, lost it on a bend a 60 changign gear... was flat out tho oops. soon as i went into 3rd it just lost the backend so fast, also was a bit wet but o well.

i have a project theat on clio16ver i will register for a payed member on here soon :) then start another thread up wooo
Sorry but I did not quite understand everything ;) you mean you have crashed the car right?

kj16v
09-02-2008, 00:51
Bad luck about car mate. Naughty boy!

Just goes to show (well, WENT to show!) that it's all about power-to-weight. Losing weight makes up for £££ in engine mods.
Mine's got full interior + sub and I don't think I could get anywhere near 5's. Don't care tho. I like not sitting in a tin can!

Mr.AdamB
09-02-2008, 09:50
yeah i culdnt have my clio as an everyday car again, its harsh.

once its rebult it will be 10x worse, coilovers, powerflex bushs gna be a nightmare on bumpy roads :P but i loves it. gna be a weekend car for me :)