PDA

View Full Version : Williams cams and pulleys/cambelt



Taylor
28-08-2007, 15:29
Afternoon! GDI have some Williams cams that were ordered and no longer required if anyone is after a set of new unused cat cams.

They are the same ones TheJesus had in his and I have the specs here.

Cat Cams 225
Inlet cam 260
Exhaust cam 258
10.9mm lift inlet
10.65mm lift exhaust
1.55mm lift at TDC.

These and the pulleys cost £655 inc VAT new, but Andy has said if anyone needs a campbelt doing he'll do the lot for £955 fitted, otherwise they will just be gathering dust. At 5 hours labour plus the cam belt this is good value

Anyone that's interested can PM me or call Andy direct on 01480 860001