PDA

View Full Version : Scuttle Panel Air Filter Relocation



Coops
27-08-2007, 18:40
What do people use to make the hole in the bulkhead? am not wanting to use a grinder as i figure it'll send sparks all over the shop and make a right mess, drill loads of times?

also for those that have done it where roughly in the bulkhead have they drilled? mines an open i/k on the end of a metal boost pipe so the hole will be essentially circular!pics?

this one goes out to shaks, gunner and neil in particular!

cheers

Coops

Clio_GTT
27-08-2007, 18:53
B&Q sell hole saws, bosch ones are good, you'll need a chuck and hole saw which is quite pricey tho

drsmith1979
27-08-2007, 19:05
cover all the necessary things with a fire retardant blanket and use the grinder, it works... me and gunner did it!

MAXIBOY
27-08-2007, 19:08
i used a hole saw and fitted it were the pace charger tank went.

http://i36.photobucket.com/albums/e15/123maxiboy/Picture011-2.jpg

as above

VIPERONE
27-08-2007, 19:09
haha couldnt agree more Smith!..

Start Sparking Cooper

Coops
27-08-2007, 19:15
right, am gonna crack on with that asap, cheers for the pic neil thats spot on! 8)

Winston
27-08-2007, 19:37
haha couldnt agree more Smith!..

Start Sparking Cooper..... yeeeeeeeeeeeeeeeee haaaaaa :cowboy:

:P