How do I fit a strut brace?

[spadey]

Ok call me stupid but I have a atrut brace and wanna fit it but am not sure how to do it...

Firstly there are no holes so
A) how do I drill the holes as in do I remove the wheels and plastic stuff under the wheel arches after Ive drilled a hole?

B) what size bolts do I need?
C) the coil pack seems to be in the way so do I just lower it?

Sorry for being stupid just wanna do it correct.

Steve

[Daz.]

The coil pack you just turn upside down - its only one screw, I know this as I've done it already in preperation for fitting a brace myself but like you have no idea how to do it properly :oops: :lol:

[spadey]

Thanks mate, yeah thought so with that but wanted to check...

I am assuming rightly or wrongly that you pop it into position, drill d holes, take the plastic under wing stuff out pop d bolts through and tighten em?

Just hope someone confirms the best way to do it.

Steve

[MAXIBOY]

thats the way mate. use 6mm or 8mm bolts depending on your brace and big washers underneath to spread the load better

[Bailey_1260]

And make sure you rust proof everything as you are drilling the strut turrets.