PDA

View Full Version : Clifford Alarm



MatrixGuy
11-08-2007, 16:56
Hiya,

I have a Clifford Concept 300 alarm system thats fitted to my Williams.

Does anyone know why it wouldn't "chirp" when locked/unlocked?

I think it may be the backup battery but how easy is it to replace?

Thanks

Dancliovalver
11-08-2007, 17:34
i know u can press a combo of buttons on your fob to make the alarm silent, if you have a manual try that

hope this helps

MatrixGuy
11-08-2007, 17:47
i know u can press a combo of buttons on your fob to make the alarm silent, if you have a manual try that

hope this helps
i tried that bud, no luck. :(

DanClio
11-08-2007, 19:03
If you look on the clifford site they have all the manuals on there, but you have a separate box in the car somewhere with buttons on it, and its those which you need to find and fiddle with.

Like i say its all on cliffords website.

Hope this helps mate.

MatrixGuy
11-08-2007, 19:26
If you look on the clifford site they have all the manuals on there, but you have a separate box in the car somewhere with buttons on it, and its those which you need to find and fiddle with.

Like i say its all on cliffords website.

Hope this helps mate.

I read the manual completely bud. It says you can change settings via the PlainView 2 switch but mine doesnt have one!!

DanClio
11-08-2007, 19:28
yeh thats the one, i can only guess if it doesnt have it then you cant change it unless you buy one...

clio_rsi_turbo
11-08-2007, 20:19
they all have them, its just a case of finding it. mines fitted in the glove box.

Allan
11-08-2007, 20:37
save your self the hassle remove the clifford and get a real alarm :D

clio_rsi_turbo
11-08-2007, 21:55
:shock:

MatrixGuy
12-08-2007, 11:11
they all have them, its just a case of finding it. mines fitted in the glove box.
ahhh, i see, might have a look around, lol.

I thought Clifford was one of the best Allan?!

richy
12-08-2007, 11:15
put it in valet mode then disconnect the car battery, wait about 5mins then reconnect the car battery and take it out of valet mode, should work again then.

:)

Allan
12-08-2007, 12:35
oh i hate cliffords with a passion lol.

used to work at a place that installed them and they were always going wrong and forgetting settings ect.

Toad all the way if i needed one.

MatrixGuy
12-08-2007, 16:33
well i found the Plain View 2 swtich, lol, it was pratcially right in front of my nose. :oops:

I entered thr valet code but didnt hear any chirps like it said i wud.

going to get a new back up batter. does anyone know where the siren/box is?! lol.