PDA

View Full Version : Power Boost Valve to fit any injection clio,16v williams etc



Dan_mk1
03-08-2007, 11:00
FSE POWER BOOST VALVE
MULTI-POINT ELECTRONIC PETROL INJECTION MODELS ONLY

What is a 'Power Boost Valve'...?

The Power Boost Valve is a high performance tuning part which replaces the original equipment fuel pressure regulator, they are quick and simple to install with moderate automotive knowledge and come with fitting instructions.

These are an adjustable 'Rising Rate' Fuel Pressure Regulator (1.7:1) designed for use on electronic petrol injection engines. On acceleration the Power Boost Valve will increase the fuel pressure at 1.7 times the standard rate, this will produce a healthy, strong fuel mixture which will instantly improve the performance and drivability of your vehicle. On constant throttle and cruise conditions the valve returns to a normal regulator function and provides the usual fuel economy. The valve features the ability to adjust the static fuel pressure if necessary, by an adjustment screw on the crown of the unit.

Fitting these valves has a very similar effect to having a 'Chip Upgrade' but without having to modify the electronics or ECU. These units are mechanical and are considered maintenance free.

Quicker throttle response + Faster Acceleration
Up to 15% extra engine power
Eliminates throttle hesitation or flat spots
Suitable for standard and tuned vehicles
Normal idle mixture retained (with adjustment if required)
Normal economy on cruise & light throttle
Fitting instructions included
Manufactured to original equipment specification

http://img.photobucket.com/albums/1003/dan_mk1nova/Pics562.jpg

http://img.photobucket.com/albums/1003/dan_mk1nova/Pics563.jpg

http://img.photobucket.com/albums/1003/dan_mk1nova/Pics564.jpg

http://img.photobucket.com/albums/1003/dan_mk1nova/Pics565.jpg

http://img.photobucket.com/albums/1003/dan_mk1nova/Pics566.jpg

These are going for £80 on ebay
£50 delivered, never been fitted.