View Full Version : putting engine in with or without loom
lewis_willy2
25-07-2007, 18:34
im putting my friends engine in 2mro and mine next month and am wondering what peoples views are on which is easiest.
putting the engine in then connecting the loom? or
putting engine and loom in in 1 go?
ive only ever done it with loom connected and it kinda got in the way
lewis
Clio_GTT
25-07-2007, 18:52
deffo with loom on mate, those ****ing wired clips are a coont at the best of times and when you need japanese hands and you've gotta connect one of them up swear words start to flow
defo 100% as above, can get it all tied up nicley while engine is out too, and routed properly, and the point about the clips is a good one
lewis_willy2
25-07-2007, 21:10
understood. i broke the injector ones just removing it!!!!!
i put engine in then put loom on, didnt have any problems was easy enough.
understood. i broke the injector ones just removing it!!!!!
hard to get off easy to push on though.
understood. i broke the injector ones just removing it!!!!!
hard to get off easy to push on though.
Piss easy :D
I've dropped an engine in with the loom connected up, didn't have any issues with it getting in the way?
its easy enough to do after the engine goes in pal....plus u dont risk any damage
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.