PDA

View Full Version : Front bumper bolts



DaveH
12-07-2007, 07:44
Anybody know what type of bolts hold the bumper on, specifically the ones that screw upwards underneath the headlights? Are they the same as the front wing bolts?

Cheers.

DaveH
13-07-2007, 00:06
Nobody? Someone mustve had a front bumper off before!

MAXIBOY
13-07-2007, 00:16
which bolts do you mean as there arent any around the headlight as far as i,m aware.

also what size are you on about. bolt head. pitch length etc

DaveH
13-07-2007, 01:01
You have one on either end, the one behind the number plate and then (so i was told) there should be one either side that screw upwards from underneath into the front panel in line with the headlights to hold the bumper from sagging causing a gap between the bottom of the headlights and top of the bumper.

Thread pitch and length are all i need really as head size doesnt matter

MAXIBOY
13-07-2007, 01:06
i think there 6mm thread 1.0 pitch and about 25mm long but not 100% as mine are different on the maxi. but the bolt in small gaps on the front subframe if i remember rightly that are two small for 8mm,s i think.

but not 100% sure as it been a while.

DaveH
13-07-2007, 18:29
Thanks maxiboy, im going to try and find something to use in work tomorrow.