PDA

View Full Version : Plastics 4 Performance



AndyFielder
10-07-2007, 00:06
HI Andy

Prices and info for the Clio MK1 kits are below, The windows do not need to be stamped for MOT/MSA or FIA purposes. I have detailed the prices for all the different materials we have but please feel free to call me if you need any more info or wish to place an order over the phone (01204 696 609) oy you would like some further info on the group buy scheme.

Renault clio mk1 window kit (Meets or exceeds current MSA / FIA specifications)

*Kit contains all windows except for the front screen
*Rear screen is a fully thermoformed item, matching the original shape and curvature of the glass


4mm clear FLEXIGLASS @ £180.00 + VAT
4mm clear, Bronze or Grey POLYCARBONATE @ £200.00 +VAT
4mm clear LEXAN MARGARD POLYCARBONATE @ £380.00 + VAT

Slider Kits @ £20.00 + VAT per door and are fully installed

Shipping to mainland UK is approx £15.00 + VAT

We manufacture to order and our delivery times are approx 2 week at the moment


*FLEXIGLASS is a DOT approved safety plastic, available only from Plastics 4 Performance and we consider this to be a good all round material for all forms of motorsport except rallycross

*POLYCARBONATE - We only use genuine MAKROLON or LEXAN UV protected exterior grade materials which have DOT, ANSI and ISO approvals for use as safety plastic and all our polycarbonate kits are 100% polycarbonate, we do not substitute for lower grade materials in thermoformed screens

*LEXAN MARGARD POLYCARBONATE -Abarasion resistant polycarbonate kits, the material has a special hard silicon coating applied to both surfaces to combat scratching, Carries all safety certificates needed and we are proud to say that Plastics 4 Performance are the only suppliers of moulded hardcoat screens in the UK

Thanks for the enquiry Andy

Regards

Paul Davenport

Plastics 4 Performance
Unit 1 Pearl Brook Industrial Estate
Chorley New Road
Horwich
Lancashire
BL6 5PX


UK Telephone / fax 01204 696 609
International Telephone / fax +44 1204 696 609
Mobile 07890 513 398
eMail info@plastics4performance.co.uk
Web www.plastics4performance.co.uk

MAXIBOY
10-07-2007, 00:13
any photos of the bronze glass

AndyFielder
10-07-2007, 00:20
http://www.plastics4performance.co.uk/images/rotate/large_images/tintedwindows2.jpg

that car has it i think.

MAXIBOY
10-07-2007, 00:35
mmm looks nice.

AndyFielder
10-07-2007, 12:23
Rite, lets see who wants these,

Names + what you want. I will then see how much discount we can get.

AndyFielder - 4mm clear LEXAN MARGARD POLYCARBONATE @ £380.00 + VAT

lukebartlett2405
10-07-2007, 17:03
luke bartlett 4mm clear FLEXIGLASS @ £180.00 + VAT with sliders (Dependant on discount)

matty w
14-07-2007, 11:20
would the grey look like its slightly tinted?and can you order without rear screen?probably interested

summeh
19-07-2007, 01:00
What does the Lexan weigh in at? Compared to normal glass?

AndyFielder
19-07-2007, 07:34
i dont know the difference, but its goto be pretty big.

Stoker Willi 1 303
19-07-2007, 14:31
Very interested but await to see discount price. :lol:
doesn't have to be massive but just like to think i'm getting a good deal for my pennies. :P

AndyFielder
19-07-2007, 14:37
need to know how many will be buying before i can try to arrange for a discount.

Andy

Coops
22-07-2007, 10:37
I have these windows, the rears are direct replacement for the opening originals in my set, and they no longer make a seal with the bodywork, so the rain literally pours in. the product is good, but i dont now if they fit perfect to start and bend over time with windspeed etc or something.

eitherway, fixed rear windows would be a must imo, i'm looking into getting relaplacements for my rears due to the leaking.

AndyFielder
22-07-2007, 10:48
did you have to drill the holes for the mountings coops?

i think your ment to use a 1.2 seal and have it fixed in rather than the valver opening mechanism.

Andy

Coops
22-07-2007, 11:02
they were fitted to the car when i got them, but yes there are holes in them.

point am making is the plastics4performance clio window set will come with opening rear glass if its the same i have, the 1.2 fixed glass is smalled, so you'd have to trim them down etc to fit and they may come pre-drilled also, so i'd ask is all!

also i have spoken to the guy n he says he can make up the smaller 1.2 glass with a template no danger, so am guessin he doesnt stock it/hasnt ever made it.

either way its worth contacting him to check as mine are pants as they are, cant leave the car uncovered in the rain or the back fills with water! :roll: :lol:

if you do find out if he can supply the rears fixed could you see if i can come in on the buy but just for the rears?! :wink:

cheers

Coops

stevie_b
22-07-2007, 13:25
i dont know the difference, but its goto be pretty big.

Original front window: 3.47 kgs.
Polycarb front window: 1.98 kgs.
Saving = 1.49 kgs per side

Original rear boot window: 4.71 kgs
Polycarb rear window: 2.695 kgs.
Saving = 2.015 kgs

Not weighed the rear quarters yet but think they would be about 1 kg lighter per side.

richy
22-07-2007, 13:49
so you talking around 7-8kg saved

scoobs
22-07-2007, 18:43
I was just going to make my own, You can buy the sheets from any DIY kinda store.

The rear would be harder since its Curved, but the sides would be simple i rekon.

stevie_b
22-07-2007, 20:51
so you talking around 7-8kg saved

Yep. It's high CofG weight though :lol:

AndyFielder
22-07-2007, 21:17
can you PLEASE create a list of who wants them...

yes you could make them cheaper, but it would take time, poorer quality materials and you would have to bend the rear screen. We all know that.

Loads of people talk about them... i would like a list of who would like them so i can organize a group discount.

If you would like smaller 1.2 sized non opening rear quarters please specify.

Copy the layout i have started please.



AndyFielder - (1.2 1/4's) (4mm clear POLYCARBONATE)

Stoker Willi 1 303
23-07-2007, 18:29
Stoker - 4mm clear FLEXIGLASS @ £180.00 + VAT
AndyFielder - (1.2 1/4's) (4mm clear POLYCARBONATE)

Mr.AdamB
29-07-2007, 22:10
Stoker - 4mm clear FLEXIGLASS @ £180.00 + VAT
AndyFielder - (1.2 1/4's) (4mm clear POLYCARBONATE)
Mr.AdamB - 4mm clear, POLYCARBONATE @ £200.00 +VAT

Lunner
22-09-2007, 17:50
I was just going to make my own, You can buy the sheets from any DIY kinda store.

The rear would be harder since its Curved, but the sides would be simple i rekon.

rears are curved too, as will the fronts be

d-diddy
10-10-2007, 00:52
d-diddy - (1.2 1/4's)FLEXIGLASS with sliders.
Stoker - 4mm clear FLEXIGLASS @ £180.00 + VAT
AndyFielder - (1.2 1/4's) (4mm clear POLYCARBONATE)
Mr.AdamB - 4mm clear, POLYCARBONATE @ £200.00 +VAT

once u have a final price please pm me and ill give u my details.

Mr.AdamB
29-10-2007, 17:55
1 more!!!! commmon

stew
30-10-2007, 10:53
fronts aint curved, and the 1.2 fixed rear 1/4's are no problem for paul @pfp.

8)

Matt_16v
23-11-2007, 14:29
is this still happening?

AndyFielder
23-11-2007, 14:34
yeah it could do but im skint right now!

davem
14-01-2008, 01:08
flexiglass clear with sliders and 1.2 rear windows if this is still goin ahead!

speed
08-06-2008, 18:44
is there still inrtest to keep this going, i want a set

AndyFielder
27-06-2008, 08:46
yeah, i will sort it out, possibly for the 20th August... so can people update there names!

Foley
27-06-2008, 10:23
i'd like a set please , poly grey 4mm with 1.2 1/4 ! £200 +

speed
27-06-2008, 17:12
clear polly, sliders,1.2 1/4 please how do we pay then?

Foley
10-08-2008, 20:26
Is this still happening ?