PDA

View Full Version : Top engine mount



Turbloide2
02-07-2007, 16:03
Hi all im after a new engine mount the one at the top right hand side under the plastic cover, ive looked on gsf and they list - R10110D ENG MOUNT-TOP CLIO 1.8 16V >98 will this be the one i want ?

Is it just the rubber mount i need ?
Also is it a big job to change it ?

I replaced the gear box top mount at the weekend and there is still exess movement in the engine. im also going to do the rear dog mount as well as the top engine mount any other suggestions ?



Thanks
danny

BristolSam16v
02-07-2007, 18:08
Check the dogmount first before doing the top mount, normally excess engine movement ie alot of gearstick movement, is caused by the dogmount wearing out.

cliolord
02-07-2007, 18:13
as sam said above and fit a renault 19 front subframe mount if you want it to drive like new 8)

Turbloide2
02-07-2007, 18:16
Thanks ive orded a new dog mount and i also work for a polyurathane company so will take it to work and cast it full of poly so its solid......

If im doing this is there any point it rotating the mount 90 degrees ?

Thanks

BristolSam16v
02-07-2007, 23:18
Rotating the mount :? is it a old shape clio uve got or a new 1?

And bear in mind if you uprate the dogbone mount a)the vibrations are harsh as fck but more importantly b)ull wear the other mounts out quicker!

bradharding
03-07-2007, 10:12
I need a top mount too. If you order one from GSF fella let me know how you get on. I was gonna get one weekend just gone but I'm skint now so may have to wait for payday. Let me know cheers.

Turbloide2
03-07-2007, 15:39
its a 1996 clio valver so is it advised to fill the new dog mount in with poly or best to leave it ???