KingStromba
26-05-2005, 00:09
I have a bit of oil leaking in plug 4 ans Nick informs me the rocker cover gasket made have settled after the rebuild and the rocker cover need tighting.
Question is how do i do this please?
yup, the OE gaskets swell after installation so start to weep again.
Depending on what type of bolts you have holding the cover on, you'll either need a 10mm socket or a T40 torx. Just give it a nip up, but start from the 2nd from bottom middle bolt, then go down to the nxt one, then follow a clockwise pattern eminating out till you finish at the most forward neaside bolt.
Only needs a NIP, they strip eaily.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.