PDA

View Full Version : Tightening rocker cover



KingStromba
26-05-2005, 00:09
I have a bit of oil leaking in plug 4 ans Nick informs me the rocker cover gasket made have settled after the rebuild and the rocker cover need tighting.


Question is how do i do this please?

BenR
26-05-2005, 01:09
yup, the OE gaskets swell after installation so start to weep again.

Depending on what type of bolts you have holding the cover on, you'll either need a 10mm socket or a T40 torx. Just give it a nip up, but start from the 2nd from bottom middle bolt, then go down to the nxt one, then follow a clockwise pattern eminating out till you finish at the most forward neaside bolt.

Only needs a NIP, they strip eaily.