View Full Version : Engine removal
VIPERONE
25-05-2005, 19:40
Isnt it great removing engines.
especially without a crane...looool
Lucky for him... no
Good work :P
jammy git so easy without abs!
Think Mat removed the alternator on his mates Willy3 to get engine out.. ABS is right in the way, heh.
u got abs?
He's gonna have have big ones after doing it if hes not got a crane! :wink:
Took me a long time and alot of swearing to get mine out with ABS. Thats why i'm leaving it to a garage this time. Bloody car. hehe. what you using to lift it out then mate?
Isnt it great removing engines.
especially without a crane...looool
you hardcore bastard lol!
bet you aint doing it with the box attached though its fookin impossible to lift it further than a foot off the floor with 2 of you!
ulness your dropping it off the subframe and lifting the car over the top ?
VIPERONE
26-05-2005, 16:34
Ive took the cylinder head off.... unbolted gearbox..and in a min im going to lowered the sub frame off , the gearbox should just fall out,and just pull the bottom end from under the car.. in theory should work.. practically it might hurt,
Ive took the cylinder head off.... unbolted gearbox..and in a min im going to lowered the sub frame off , the gearbox should just fall out,and just pull the bottom end from under the car.. in theory should work.. practically it might hurt,
So after how long should we wait before calling the emergency services and informing them you are trapped under your car?
VIPERONE
26-05-2005, 18:50
you'll be pleased to know engine is out along with gerabox.. its easy
Ive took the cylinder head off.... unbolted gearbox..and in a min im going to lowered the sub frame off , the gearbox should just fall out,and just pull the bottom end from under the car.. in theory should work.. practically it might hurt,
So after how long should we wait before calling the emergency services and informing them you are trapped under your car?
LMAO!!!! I'll say one word gibbo ...Axel lol
VIPERONE
27-05-2005, 05:12
the engine is out... lol
i sent winston the pic... yes the axle hurt.... it weighs a damm tonne.
shudda said mate........i have a crane.........5 mins lol
So do I but this guys HARDCORE!!!! :shock:
Next he will be putting in without crain .....Nutter lol
Yeah try putting it in without a crane and put a video up on her so we can all have a chuckle.
:lol:
Good way of getting it out without a crane though. Good work :D
VIPERONE
27-05-2005, 13:31
nice one 2 live.. choose to tell me when ive finished...lol.
btwi'll need to pop over to inspect the willy bottom end...
always like to be of assistance mate lol
VIPERONE
27-05-2005, 21:01
lol.. ballbag
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.