PDA

View Full Version : Replacing gearbox top mount



Turbloide2
26-06-2007, 10:09
Hi all just got a new gearbox top mount for my car as the old one has play init.

Whats involved in fittng it and is it a hard job ?

Thanks in advance for any info.
danny

lukebartlett2405
26-06-2007, 17:18
easy job trolley jack under the box with a block of wood or something to spread the weight. Jack it up a bit until its holding the weight undo mount bolts the mount needs a bit of hammering to remove then swap them over and re fit. i would advise a new nut aswell on the mount as mine came loose after refitting with the old nut as it is a nylock nut.

hope this helps takes about an hour to doit taking ur time