PDA

View Full Version : starter motor bracket



snowman
23-06-2007, 14:32
Has anyone got a pic of where this bracket locates,i know it goes onto the starter motor via one of the mounting bolts but not sure how?

thanks :wink:

http://i6.photobucket.com/albums/y226/bluedragon101/smc1.jpg

MAXIBOY
23-06-2007, 19:27
goes on the middle bolt facing towards the starter. bolt hole for starter motor heat shield stud for a clamp to carry the wiring loam

snowman
23-06-2007, 19:36
Am i missing part of the heatshield then as i cant see how it attaches?

http://i6.photobucket.com/albums/y226/bluedragon101/sta1.jpg

MAXIBOY
24-06-2007, 22:57
yes mine has three holes two on the rear and one at the front that yours is missing

snowman
25-06-2007, 17:14
doh,ok thanks mate,ill have to fabricate a way of holding down that corner of the shield then